RG-RAP6262(G)
RG-RAP6262(G) Wi-Fi 6 Outdoor Omnidirectional Access Point
RG-RAP6262(G) is a high-power outdoor omnidirectional dual-band access point provided by Ruijie Reyee for the scenarios such as villages, villas, parks, scenic spots, and squares. It supports 802.11a/b/g/n/ac/ax. The product can simultaneously work in the 2.4 GHz and 5 GHz frequency bands, support dual-band dual-stream MU-MIMO, and provide 2.4 GHz 574 Mbps and 5 GHz 1201 Mbps. The entire device provides a maximum of 1775 Mbps access rate, and is equipped with built-in omnidirectional high-gain antennas, which meet the coverage requirement.
Rack-Separated Mounting
With the rack-separated mounting design, the RG-RAP6262(G) can be installed by only two steps, which reduces the difficulty of overhead working.
Step 1: Fix the sheet metal bracket to the wall with expansion screws, or fix the sheet metal bracket to the pole with a clamp.
Step 2: Insert the device and connecting rod into the slot of the sheet metal bracket, and fix them with screws.
Dual Power Supplies Design
The RG-RAP6262(G) supports remote power over Ethernet (802.3at standard PoE) and local DC 12 V power supply. The device can connect to both the power supplies at the same time as power backup, to avoid power failures caused by lightning damage and greatly improve the reliability of outdoor operation.
Dual Network Ports Design
The RG-RAP6262(G) has two GE ports, which can be connected to cameras and switches. The two ports greatly enrich the outdoor networking modes and apply to more scenarios. It is an excellent choice for mixed deployment of outdoor wireless coverage and outdoor surveillance.
Intelligent Networking of the Entire Network
The RG-RAP6262(G) supports three networking modes: gateway managed, MACC platform managed, and intelligent networking. It can work with Reyee gateway, Reyee intelligent PoE switch, and Reyee access point to implement unified discovery, unified networking, unified configuration, and unified management. In addition, it can be separated from hardware controllers to work with any vendor's routers or gateways, thus reducing the costs of network building or reconstruction. The RG-RAP6262(G) also supports mesh networking, so access points can be easily deployed in the scenarios where wiring is not convenient.
Under the guidance of Reyee network app, you can launch and configure the devices on the entire network within three minutes. You can locally or remotely manage the entire network devices by using app, web, Ruijie Cloud, or Reyee Routers, or share with others for assistance management.
High-Performance Wireless Access
The RG-RAP6262(G) supports 802.11n @ 2.4 GHz, 802.11ac Wave2 @ 5 GHz, and 802.11ax. It provides 2.4 GHz 574 Mbps and 5 GHz 1201 Mbps. The entire device supports a maximum of 1775 Mbps access rate. Thanks to the super wireless performance, the network experience of wireless users is greatly improved. The 256 concurrent connections of terminals and the 300 m coverage radius also significantly improve the outdoor wireless deployment efficiency.
Outstanding Adaptive Capacity to Environment
The outer shell of RG-RAP6262(G) adopts a completely sealed waterproof, dustproof, moistureproof and flame retardant design. It has passed the 4000 V lightning protection test and meets the requirements of IP68 protection level. The RG-RAP6262(G) can be placed outdoors for a long time, and still works normally in harsh environment. On the basis of ensuring routine operation, the service life of the device is greatly improved. Moreover, the later maintenance costs of customers can be effectively reduced.
The RG-RAP6262(G) uses industrial-grade wide-temperature components and shells. Therefore, it can work normally in a wide temperature range of -30~65ºC without affecting the stability and service life. The device is suitable for the harsh outdoor environment with cold and humid weather.
AI Network Optimization
All-round intelligent network management and optimization can be implemented by artificial intelligence, including but not limited to:
The function of automatic identification and merging of new devices is added.
WAN port address conflict is avoided.
The entire network topology is intelligently shown and diagnosed.
The entire network strategy is optimized and radio frequency is adjusted.
Basic Feature |
|
Wi-Fi Standards |
Wi-Fi6 (IEEE 802.11ax) Wi-Fi5 (IEEE 802.11ac Wave2) Wi-Fi4(IEEE 802.11n) |
RF Design |
2.4 GHz, 2×2, MU-MIMO 5 GHz, 2×2, MU-MIMO |
Max. Wi-Fi Speed |
2.4 GHz: 574 Mbps 5 GHz: 1201 Mbps |
Antenna |
4 |
Antenna Type |
Built-In Omnidirectional |
Antenna Gain |
2.4 GHz: 3 dBi 5 GHz: 5 dBi |
Transmit Power |
EIRP ≤ 26 dBm(2.4GHz) ≤ 25 dBm( 5GHz ) country-specific restrictions apply Myamar: 2400~2483.5MHz ≤ 20dBm 5150~5350MHz ≤ 23dBm 5470~5850MHz ≤ 25dBm |
Fixed Ports |
2×10/100/1000 Base-T |
Max. Clients |
256, 64(2.4GHz) or 256(Total) |
Recommended Clients |
100 11AX Terminal: 16(2.4GHz) + 84(5GHz) 11AC Terminal: 16(2.4GHz)+64(5GHz) |
Max. SSIDs |
8 |
Software Feature |
|
WLAN Basic Features |
|
SSID Hiding |
Support |
Power Adjustment |
Support |
Roaming |
Layer 2 roaming Layer 3 roaming |
OFDMA |
Support |
Target wake time (TWT)* |
Support |
WMM |
Support |
Radar Signal Detection and Frequency Hopping |
Support |
WLAN Security |
|
Security Mode |
WPA-PSK, WPA2-PSK, WPA/WPA2-PSK; |
Blacklist and Whitelist |
Support |
Enhanced User Experience |
|
Wi-Fi Optimization |
Support |
Automatic RF adjustment via the platform |
Support |
User Isolation |
Layer 2 user isolation |
STA limit |
Support |
Removing Low-RSSI STAs |
Support |
Configuring STAs' RSSI Threshold |
Support |
Average Speed Threshold |
Support |
Adjusting Sending Rate of Beacon and Probe Response |
Support |
Syslog Recording Why Users Lose Connection |
Support |
Auto Channel and Power Adjustment on Cloud |
Support |
RSSI Threshold for STA Access |
Support |
Quick channel adjustment (auto channel selection) |
Support |
Networks |
|
Network Access Mode |
DHCP Client |
VLAN |
Support |
System |
|
Cloud Management |
Support |
App Management |
Support |
App Upgrade |
Support |
App Restart |
Support |
Scheduled Restart |
Support |
Local Upgrade |
Support |
Online Upgrade |
Support |
Factory Reset |
Support |
WLAN Features |
|
Frequency Bandwidth |
2.4 GHz: 20/40 MHz 5 GHz: 20/40/80 MHz |
Recommended Wi-Fi Coverage Radius |
2.4G 50m, 5G 150m |
Max. Wi-Fi Coverage Radius |
2.4G 100m, 5G 300m |
Operation Frequency Bands |
802.11b/g/n/ax: 2.400 GHz to 2.483 GHz 802.11a/n/ac: 5.150 GHz to 5.350 GHz 802.11a/n/ac/ax: 5.470 to 5.725 GHz , 5.725 to 5.850 GHz country-specific restrictions apply |
Receive Sensitivity |
|
Physical |
|
LED Indicator |
3× system LED indicator |
Buttons |
1×Reset button |
Dimensions (W x D x H) |
200mm × 220mm × 166mm(Without Mounting Bracket) |
Weight |
1.2kg(Without Mounting Bracket) |
Power |
|
Power Supplies |
|
CLOSE