With latest 802.11ax 1024-QAM modulation technology, the dual-radio dual-band design RG-AP180 wall plate access point offers maximum access rate up to 1.2Gbps for 5G. If dual-band is enabled concurrently, the high-speed Wi-Fi can reach 1.7745Gbps, offering a high-speed network experience.
Employing Ruijie’s intelligent local forwarding technology, the RG-AP180 breaks through the limitation of traffic bottleneck of wireless controllers. In collaboration with the RG-WS Wireless Controller Series, users can flexibly configure the data forwarding mode for RG-AP180. The AP also controls whether the data will be forwarded via the wireless controller according to the SSID or user VLAN, or directly sent to the wired network for data exchange.
The local forwarding technology can classify and forward delay-sensitive data which requires real-time transmission through the wired network to greatly alleviate the traffic pressure on the wireless controllers and better meet the high traffic transmission requirements of the 802.11ax network.
RG-AP180 supports a wide variety of QoS policies. For example, it provides WLAN/AP/STA-based bandwidth limitations and Wi-Fi multimedia (WMM) which defines different priorities for different service data. RG-AP180 realizes timely and quantitative transmission of audio and video, and guarantees smooth operation of multi-media applications.
With the multicast-to-unicast technology, RG-AP180 resolves the video lagging problem due to packet loss or high latency in the wireless network, and highly enhances user experience of the multicast video services of wireless networks.
The Ruijie AP180 Series Wall Plate AP adopts a wall-mounted design with 2-step easy deployment:
Step 1: Remove the original faceplate from the wall.
Step 2: Directly install the plug-and-play Wall AP and connect with original UTP cable (PoE).
This breaks through traditional wireless network construction methods by reusing existing network cables and minimizes the impact of network construction on hotel or similar settings. As no additional cabling is required, the Wall AP delivers maximum business agility and investment protection. Ruijie also offers a wide range of optional accessories to meet your unique deployment needs.
Model |
RG-AP180 |
||
Hardware specifications |
|||
Radio |
Dual-radio dual-band: Radio 1: 2.4G 11ax: 2×2 MIMO Radio 2: 5G 11ax: 2x2 MIMO |
||
Protocol |
Support concurrent 802.11a/n/ac/ax and 802.11b/g/n/ax |
||
Operating Bands |
802.11b/g/n/ax :2.4G ~ 2.483GHz 802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries) |
||
Spatial Streams |
4 spatial streams, 2x2 MIMO |
||
Max Throughput |
Maximum throughput of 2.4G: 574Mbps Maximum throughput of 5G: 1.2Gbps Maximum throughput per AP: 1.775Gbps |
||
Modulation |
11b:DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g:OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps 11n:MIMO-OFDM:BPSK,QPSK,16QAM,64QAM 11ac:MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM 11ax: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM |
||
Transmit Power |
≤100mw(20dBm, radio transmit power only) |
||
Dimensions |
116mm * 86mm *40mm |
||
Weight |
0.37kg |
||
Service Ports |
Front: |
||
Power Supply |
Support PoE Support local power supply (DC Power adapters should be purchased from third-party vendors separately if needed) |
||
11ax Feature |
Support 802.11ax Support MU-MIMO |
||
Management Port |
1 Micro USB port (hidden) |
||
Reset |
Support (hidden) |
||
LED indicator |
Support (hidden) The indicator can be switched off |
||
Built-in Antenna |
Built-in low-radiation omnidirectional antenna (antenna gain 3.5dBi) |
||
IoT Protocol |
Support Bluetooth5.0(BLE), Zigbee |
||
Power Consumption |
<10W |
||
IP Rating |
IP41 |
||
Anti-theft |
Standard: ordinary screws |
||
Color of AP Enclosure |
White |
||
Wi-Fi Alliance |
· Wi-Fi CERTIFIED™ a, b, g, n, ac · Wi-Fi CERTIFIED 6™ · WPA3™-Enterprise, Personal · Wi-Fi Enhanced Open™ · Wi-Fi Agile Multiband™ · WMM® |
||
Relevant Standard |
Safety Standard |
EN/IEC 62368-1 |
|
EMC Standard |
EN301 489, EN55032, EN55035 |
||
Health Standard |
EN 62311 |
||
Radio Standard |
EN300 328, EN301 893 |
||
Environment |
Operating temperature:0°C~45°C |
||
Storage temperature:-40°C~70°C |
|||
Operating humidity:5%~95%(non-condensing) |
|||
Storage humidity:5%~95%(non-condensing) |
|||
MTBF |
250,000 hours |
||
Installation Mode |
Compatible with UK/US/EU Junction box *Universal Mount Kit need to purchase separately for US/EU junction box |
||
Software Specifications |
|||
WLAN |
Maximum clients per AP |
1024 |
|
BSSID capacity |
8(recommended to configure a maximum of 5 BSSIDs per radio in actual application) |
||
SSID hiding |
Support |
||
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
||
Remote Intelligent Perception Technology (RIPT) |
Support |
||
Intelligent load balancing based on the number of users or traffic |
Support |
||
STA control |
SSID/radio-based |
||
Bandwidth control |
STA/SSID/AP-based speed control |
||
Security |
PSK, Web, and 802.1x authentication |
Support |
|
Data encryption |
WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
||
QR code authentication |
Support (integration with RG-WS series wireless controller) |
||
SMS authentication |
Support (integration with RG-WS series wireless controller) |
||
PEAP authentication |
Support (integration with RG-WS series wireless controller) |
||
Data frame filtering |
Whitelist, static/dynamic blacklist |
||
User isolation |
Support |
||
Rogue AP detection and countermeasure |
Support |
||
Dynamic ACL assignment |
Support |
||
RADIUS |
Support |
||
CPU Protection Policy (CPP) |
Support |
||
Network Foundation Protection Policy (NFPP) |
Support |
||
Wireless Intrusion Detection System (WIDS) |
Support |
||